Overview
In Lujiang, Anhui, KAMRON equipped two different material lines. Tongguan Lujiang Mining needed wheels and chassis of dewatered copper tailings haulers washed at roughly 80 vehicles a day. Anhui Ruite mixing plant needed its outlet vehicles cleaned with a gantry high-pressure washer plus dedicated tail and wheel washing. Both lines share the same problem: strongly adhering fine particles and heavily loaded wash water.
Client Profile
Lujiang Mining is a copper ore-dressing operation where dewatered tailings leave by truck, about 80 vehicles a day - moderate volume but continuous. Ruite is a ready-mix concrete plant whose outbound vehicles are mainly mixer trucks, with dust and residual slurry concentrated at the outlet. Both sit inside or adjacent to production areas, with clear limits on water overflow and road cleanliness.
The Challenge
- Both tailings fines and residual concrete slurry adhere strongly, so washing wheels alone cannot prevent mud carry-out; chassis and lower body need coverage.
- Slurry volumes are high, and without managing sediment in parallel the equipment quickly loses washing performance to silting.
- The Lujiang site required automatic, unattended washing with adjustable wash length for different vehicle types.
- Vehicles at the Ruite outlet vary greatly in length, requiring a pass-through layout of unrestricted length that also covers the tail and wheels.
- With heavy mine traffic, the anti-collision device had to withstand 50-tonne truck impacts without damage.
The Solution
At Lujiang Mining, a pit-type wheel wash of 7500 x 4500 x 1500 mm houses internal DN40 wash piping with DN50 longitudinal flood piping; power is two 15 kW wash pumps plus a 7.5 kW desilting pump for 37.5 kW. The middle 5 m is the standard wash position with 1 m gate-valve sections at each end making wash length adjustable. Infrared through-beam sensing triggers washing automatically without attendance. The anti-collision device is rated for 50-tonne truck impacts, contactors are Schneider and motors Class 1 efficiency. At Ruite, a gantry washer provides a 3.8 m clear width and 4 m wash height with unrestricted length, 40 kW per unit and 700 L per vehicle. Washing combines one gantry high-pressure pre-wash, one gantry high-pressure deep wash, two sets of sub-3 m body washing, plus tail and wheel washing systems; the main body measures 6250 x 4400 x 4700 mm and a 160 m head pump drives the pre-wash stage.
Project Details
- At Lujiang, twin wash pumps plus a dedicated desilting pump handle tailings slurry in the same cycle, preventing sediment build-up from degrading performance while operating unattended.
- Gate-valve sectioning gives a 5 m standard wash length with 1 m adjustable sections at each end, covering different vehicles and cleaning intensities.
- The anti-collision device is rated for 50-tonne truck impacts, matching frequent heavy mine traffic, and motors are Class 1 efficiency.
- At Ruite, four wash stages cover the lower body, tail and wheels, keeping outbound vehicles free of slurry under a length-unrestricted pass-through layout.
- A 160 m head pre-wash combined with deep washing holds nozzle effectiveness even in the dusty conditions of a mixing plant.
On one production line, material behaviour determines the washing strategy, not the reverse. Copper tailings call for a combination of wash-away plus desilting; residual concrete slurry calls for multiple passes with tail coverage. Customising the process to material behaviour at each site shows that the generality of wash equipment can only rest on process fit.
Project Gallery









