Overview
The coal yard expansion and coal handling retrofit at Jinhua Ningneng Thermal Power needed a wheel-wash facility for engineering vehicles, but the available space inside the plant was tight. KAMRON responded with a compact 4000 x 4000 x 4700 mm modular KM-H3 unit delivering 1.6 MPa high-pressure washing, three-pump power supply and full automatic control within a four-metre square footprint.
Client Profile
The coal yard expansion and coal handling retrofit of Jinhua Ningneng Thermal Power is in Jinhua, Zhejiang, with engineering vehicles moving material between the coal yard and the coal handling system. Plant interiors are equipment-dense with constrained lanes, leaving limited footprint and headroom for a wash facility while still demanding full automatic control and level monitoring.
The Challenge
- Available footprint and headroom inside the plant ruled out a conventional 15 m-class unit, requiring full washing capability within compact dimensions.
- Wash pressure had to reach 1.6 MPa to meet plant vehicle requirements, which challenges pump layout in a compact unit.
- Controls had to automate both high-pressure washing and clear-water tank level, with wash counting, start/stop delay adjustment and level monitoring.
- The control cabinet is outdoor type, requiring water and dust protection in a dusty power plant.
- The foundation had to carry 150 tonnes.
The Solution
KAMRON supplied a compact KM-H3 heavy-vehicle wash machine measuring 4000 x 4000 x 4700 mm in modular grouped construction. The main frame uses Q235 cold-rolled steel folded as one piece, hot-dip galvanised and coated; wash piping is independently routed GB DN50 galvanised steel for easy servicing, with 304 stainless nozzles. Power comes from three 15.0 kW pumps at 20 m3/h and about 160 m head each, giving 50 kW total, 1.6 MPa wash pressure and no more than 500 L per vehicle. Controls use Siemens PLC with Schneider components to automate high-pressure washing and clear-water tank level; the outdoor stainless cabinet is IP54 with a polished finish, pushbuttons and indicators on the door, and an HMI providing wash counting, start/stop delay adjustment and level monitoring. The foundation is rated for 150 tonnes and wash water is collected and reused.
Project Details
- A four-metre square compact unit fits constrained plant lanes, avoiding dedicated building or lane modifications for washing.
- Three pumps achieve 1.6 MPa within compact dimensions, meeting plant engineering vehicle cleaning requirements.
- Siemens PLC with Schneider components automates both washing and tank level, with HMI wash counting and delay adjustment.
- The polished outdoor stainless cabinet at IP54 suits the dust and moisture of a power plant.
- A 150-tonne foundation rating and wash-water reuse hold operating water consumption down.
Deploying environmental facilities inside an existing power plant makes footprint the most rigid constraint. Carrying 1.6 MPa and full automatic control in a four-metre square unit shows that miniaturisation is not feature deletion but a rearrangement of pumps, piping and controls - under space constraints, systems engineering matters more than simple scaling down.
Project Gallery








