Home/Case Studies/Qinghai Xiyu - Wash Station for the Multi-Metal Recycling and Environmental Upgrade
Qinghai Xiyu - Wash Station for the Multi-Metal Recycling and Environmental Upgrade
Non-ferrous & Mining

Qinghai Xiyu - Wash Station for the Multi-Metal Recycling and Environmental Upgrade

Top, side and chassis washing in three dimensions including the bed interior - alkali-resistant structure - built for a sealed cold-climate workshop
客户:青海西豫有色金属有限公司 · 服务方:上海臻欧实业发展有限公司(凯美龙 KAMRON)
← ← Back to all cases

Overview

The multi-metal resource recycling and environmental upgrade project of Qinghai Xiyu Nonferrous Metals required a vehicle wash facility. KAMRON supplied an 8 x 4 x 5.8 m KM-H3 drive-through heavy vehicle wash system whose wash zone combines chassis, side and overhead washing in three dimensions, able to wash inside the bed directly. The structure is designed to resist alkaline effluent and adapted to the sealed, winter-heated workshop arrangement.

Client Profile

Qinghai Xiyu Nonferrous Metals is located in Qinghai province, where the project covers multi-metal resource recycling and an environmental upgrade. Zones A and B are fully enclosed with winter heating inside the workshop (radiators, steam supplied by the owner); the circulating water tank inlet piping is buried below the frost line, and rapid doors are fitted at the workshop entrances. Vehicles are mainly heavy tippers and the material is alkaline, placing higher demands on structural corrosion protection against wash effluent.

The Challenge

  • The material is alkaline, making wash effluent corrosive, so the main structure had to be designed against alkali attack.
  • Qinghai is a severe cold region: circulating-water inlet piping required burial below the frost line, and workshop entrances needed rapid doors with winter heating.
  • Standard chassis and side washing could not reach material left inside the bed, so overhead washing had to be added.
  • The site required visibility so operators could observe vehicles washing inside the bay.
  • The cold, sealed workshop environment demands long-term stability from both structure and electrical components.

The Solution

KAMRON supplied a KM-H3 drive-through heavy vehicle wash system measuring 8000 x 4000 x 5800 mm at 80 kW, with wash pressure of at least 0.8 MPa and 500 L per vehicle. The wash zone is modular, comprising a chassis system washing the underbody and tyres through 360 degrees, side systems cleaning both flanks and tyre faces, and an overhead system washing inside the bed. Piping is independently routed DN50 galvanised steel for easy maintenance, with 304 stainless nozzles in threaded connections for replacement. The main structure uses GB Q235 galvanised square tube with galvanised anti-rust electrostatic coating; transparent polycarbonate panels on both sides and the top allow direct observation of vehicles washing inside, and anti-collision rails run along both sides of the lane. The foundation uses a bedding layer rated for 100-tonne traffic, with no standing water and wash-water recovery.

Project Details

  • The overhead system washes inside the bed directly, solving what chassis and side washing cannot reach.
  • A structure designed against alkaline effluent extends service life where multi-metal material is alkaline.
  • Transparent panels on both sides and the top let operators observe vehicles washing inside the bay directly.
  • Inlet piping buried below the frost line, combined with workshop winter heating and rapid doors, suits Qinghai's severe cold.
  • Anti-collision rails and a 100-tonne foundation protect both structure and vehicle under frequent heavy traffic.

Where alkaline material and severe cold coincide, equipment life is decided by two of the least visible factors: structural corrosion protection and pipe burial depth. By listing three-dimensional washing, alkali-resistant structure, frost-line burial and viewing panels as co-equal design items, this project shows that reliability in extreme duty comes from addressing constraints head-on rather than adding redundancy.

Project Gallery

Ready to upgrade your wash system?

Tell us your vehicle types, site layout and washing needs — KMRON engineers will reply within 2 business days with a tailored proposal and quote.

Get a Quote →