Overview
Liuzhou Iron and Steel is advancing an unorganised ultra-low emission retrofit, equipping the sinter plant yard, belt conveyors, galleries and building enclosure project with vehicle washing facilities. KAMRON supplied two fully enclosed and three semi-enclosed wash stations under the contract, each with 200 wash nozzles plus six mud-flushing nozzles for high-density coverage, with finish colour matched to the yard roof at the owner's request.
Client Profile
Under this project Guangxi Huarui Engineering Design Co., Ltd. signed the technical agreement as buyer with Shanghai Zhenou, with Liuzhou Iron and Steel as end user. The wash stations are installed inside the Liugang plant in Liuzhou, Guangxi. Supply pressure at the connection point is 0.1-0.3 MPa, outdoor design relative humidity is 75 percent in winter and 65 percent in summer, and atmospheric pressure is 100.99 kPa in winter and 99.32 kPa in summer.
The Challenge
- The retrofit required wash units mounted at 1.5-2 m height and at least 15 m long, cleaning up to the underside of the bed while covering wheels and body.
- Wash time had to be at least 60 seconds with a stop bar and shake-dry device ensuring no drips leave with the vehicle.
- Each unit required 200 wash nozzles and 6 mud-flushing nozzles, with 1.5 mm and 3.2 mm orifices respectively and cleaning pressure preferably above 1.0 MPa.
- Site conditions at the yard entrances differed, with some points needing full enclosure and others only semi-enclosure, mixed within one batch.
- A filter was required for each unit, and the finish colour had to match the yard roof.
The Solution
KAMRON supplied two fully enclosed wash stations (15 x 4.6 x 5.5 m) and three semi-enclosed stations (15 x 4.6 x 1.5 m) for the works, each at 70 kW, handling 12-60 vehicles per hour and vehicles of 12 x 2.5 x 3.6 m, using 400-600 L per vehicle. Each unit carries 200 wash nozzles and 6 mud-flushing nozzles with 3.2 mm and 1.5 mm orifices respectively. Units are mounted at 1.5-2 m height and at least 15 m long, with wash time of at least 60 seconds, a stop bar, shake-dry device and dedicated filter ensuring no drips leave with the vehicle. Finish colour is matched to the yard roof as required by the buyer.
Project Details
- 200 wash nozzles per unit in a uniform 1.5 mm array cover wheels, body and the underside of the bed at higher density than conventional layouts.
- Six 3.2 mm mud-flushing nozzles specifically handle the caked material common in material yards, working alongside the wash nozzles.
- A wash time of at least 60 seconds with a stop bar and shake-dry device ensures outbound vehicles leave without drips, reducing secondary road soiling.
- Mixing enclosed and semi-enclosed units by entrance condition avoids over-investing at points that do not need it.
- Finish colour matched to the yard roof makes the emission-control facility visually part of the existing yard structures.
An ultra-low emission retrofit does not test the ceiling of a single machine but the consistency with which one batch of machines adapts across varied site conditions. Here one nozzle family and one wash standard cover five units, differentiated only by enclosure type - a route that keeps both cost and outcome manageable.
Project Gallery






