Overview
Xinjiang Xinye Energy Chemical needed an automatic wash system on the east side of the coal preparation workshop unloading bay, serving at least 400 coal trucks a day in drive-through mode. KAMRON supplied an unattended automatic washer with infrared triggering, selectable automatic or manual control, and outlet-trench desilting as standard, giving synchronous slurry collection and reuse.
Client Profile
Xinjiang Xinye Energy Chemical is located at 10077 Jing Er Road, East Industrial Park, Wujiaqu Economic and Technological Development Zone, Xinjiang. Vehicles entering and leaving the coal preparation workshop unloading bay are mainly coal semi-trailers and engineering trucks; coal dust and clayey material carried out on wheels readily becomes road dust, making this a key point in plant environmental control. The project was procured through agent Sinochem Commerce Co., Ltd. under project number 0747-2360SCCXJ220.
The Challenge
- At least 400 coal trucks a day must be washed, requiring highly continuous unattended operation without relying on manual control.
- Clay carried on vehicles drops into the collection trench after washing; without synchronous desilting the trench blocks quickly.
- Wash piping must withstand long-term abrasion by coal-slurry water, so material and jointing need high durability.
- Electrical reliability matters in a coal chemical plant, requiring proven brands and an outdoor control cabinet.
- With severe Xinjiang winters, the equipment must run reliably at low temperatures.
The Solution
KAMRON supplied one unattended automatic washer using infrared triggering with selectable automatic or manual control. The equipment covers the load-bearing platform, curved side walls, wash assembly, control system, start device and trench desilting unit; all wash piping is 304 stainless steel with flanged joints. Wash time is adjustable from 20 to 120 seconds per vehicle, equivalent to 20-40 vehicles per hour, and the unit suits semi-trailers and engineering trucks of 80 tonnes and above. Clay carried in washes off into the collection trench, where desilting nozzles run in step with washing; slurry flows to a settling tank for filtration and reuse, with a desilting rate of 15 m3 per hour. Control uses an outdoor stainless cabinet with OMRON, Schneider and Siemens components.
Project Details
- Unattended design with infrared triggering sustains 400 coal trucks a day without manual operation, sharply cutting labour.
- Trench desilting nozzles run in step with washing, moving slurry promptly into the settling tank and preventing clay from caking and blocking the trench.
- All-304 stainless flanged piping stays serviceable under abrasive coal-slurry water.
- Filtration and recycling of slurry at 15 m3 per hour reduces fresh-water draw and effluent discharge.
- Adjustable 20-120 second wash time allows settings by soil level, balancing cleaning performance against throughput.
In a coal chemical plant with heavy dust, high traffic and a lean team, unattended operation is not an add-on but the precondition for the project to work. This project puts desilting and washing on the same cycle precisely because any step needing human intervention gets amplified into a bottleneck under highly continuous operation.
Project Gallery








