Overview
The logistics fleet of Yunnan Tin Group comprises extra-long heavy vehicles 17 m long, 2.55 m wide and 4.95 m high. KAMRON responded with a custom KM-H3 drive-through heavy-vehicle wash system which, beyond standard chassis and side washing, adds an overhead high-pressure swivel wash unit to clear material adhering inside the cargo bed.
Client Profile
Yunnan Tin Group (Holding) Co., Ltd. is one of the world's principal tin producers, and its logistics arm handles inter-plant and outbound transport of raw materials and products. The fleet is dominated by extra-long heavy tippers and semi-trailers whose bed walls and floors retain moist material, which external washing alone cannot fully clear.
The Challenge
- At 17 m, the vehicles exceed the effective wash run of a conventional drive-through machine, requiring a 20 m-class modular unit.
- Material adhering inside the bed cannot be removed by chassis and side jets alone, so an overhead high-pressure swivel wash unit was required.
- With vehicles 4.95 m high, wash-zone clear height and nozzle coverage had to be scaled up accordingly.
- With continuous logistics operation, the equipment had to sustain 40-60 vehicles per hour with round-the-clock service response.
The Solution
KAMRON supplied a custom KM-H3 drive-through heavy-vehicle wash system with a 20000 x 4600 x 5500 mm modular unit, comprising a chassis wash system delivering 360-degree coverage of the chassis, tyre faces and tyre gaps, and a side wash system covering both flanks and tyre sides; an overhead high-pressure swivel wash unit clears material inside the bed. Wash piping uses independently routed DN50 hot-dip galvanised square tube for easy servicing, with 304 stainless nozzles. Wash pumps are four 15 kW units at 20 m3/h and 160 m head each; the machine draws 60 kW, uses 700 L per vehicle and handles 40-60 vehicles per hour. The foundation uses bedding plus concrete over 35 cm deep for a 150-tonne traffic rating, with no standing water and wash-water recovery.
Project Details
- A 20 m-class modular unit fits the 17 m vehicles, letting extra-long carriers complete the entire wash run in a single pass.
- The overhead high-pressure swivel wash unit specifically clears material inside the bed, reducing spillage along the route.
- The main frame of Q235 cold-rolled carbon steel is folded as one piece, hot-dip galvanised and coated, with a design service life of not less than 15 years.
- Four 15 kW pumps with 160 m heads hold nozzle pressure and washing performance even at the far end of a long run.
- KAMRON commits to 365 x 24 technical service with a two-hour response and on-site arrival within twelve hours.
Extra-long vehicles and in-bed cleaning are two easily overlooked boundary conditions: the first tests unit length and end-of-run pressure, the second tests wash dimensionality. By extending washing from the vehicle exterior into the interior of the bed, this project shows that in industries with highly adhesive materials, the value boundary of a wash system should follow material behaviour rather than vehicle dimensions.
Project Gallery









