Rotating brush packs physically scrub the vehicle, with brush pressure auto-adjusted and monitored in real time by vehicle type — the strongest stain-remover in the whole range, balancing cleaning power with paint protection. Rule of thumb: brushes for heavy soiling, touchless for paint care.
← Back to ProductsThe base model of the gantry brush series. Brush packs (top brush, side brushes) physically scrub the vehicle; brush pressure auto-adjusts and is monitored in real time by vehicle type, balancing cleaning power with paint protection. The strongest stain-remover in the whole range.
Sanitation stations, waste-treatment plants and other sites with stubborn leachate, oil and grease, and caked mud.
The entry model with the simplest configuration; later models (KM-H220 enhanced drying, KM-H230 flagship) build on it. Only three models in the series, with a clear ladder: Standard = brush wash only; Enhanced Drying = brush wash + 6-fan dryer; Flagship = high-pressure pre-rinse + brush wash + full drying.
Compared with the pass-through KM-H3: the vehicle stops and the gantry strokes back and forth — stronger stain removal but longer per-vehicle cycle and lower throughput, suited to batch fine washing rather than high-frequency gate traffic. Compared with the touchless KM-H1: physical brushing removes stubborn soiling (leachate, oil, caked mud) most thoroughly, at the cost of brush-to-body contact; adaptive brush pressure protects paint as much as possible.
Built on the KM-H210 with a 6-fan drying system: larger air volume, wider coverage, simultaneously drying dead corners such as mirrors and gaps. The body is blown dry right after brushing, reducing water spots and winter freezing.
Sanitation stations and waste-treatment plants with high batch volumes and tight dispatch schedules.
The standard model (KM-H210) air-drips naturally after washing; the enhanced-drying model goes from wash to dry, drive-away-ready, sharply improving dispatch efficiency. The flagship (KM-H230) adds side and top high-pressure rinsing on top of drying for even stronger stain removal.
Six drying fans bring the brush washer near a wash-and-drive-away dispatch pace, a clear efficiency edge in batch sanitation-truck washing. Stronger stain removal than the touchless KM-H120 (physical brushing); lower per-unit throughput than the pass-through KM-H3, but a more thorough wash and smaller footprint for space-constrained depots.
The flagship of the series. Fully loaded: 6-fan drying + side high-pressure rinsing + oscillating top high-pressure rinsing + physical brush scrubbing. Heavy soiling is first stripped by high-pressure pre-rinse, then thoroughly brushed, then quickly blown dry by 6 fans — pre-wash, brush, high-pressure and drying in one, at the peak of the series in both result and efficiency.
Sanitation stations and waste-treatment plants with the highest demands on cleanliness and dispatch speed.
The most fully equipped and most capable model in the series. The enhanced-drying model (KM-H220) has only brush wash + drying; the flagship adds side and top high-pressure pre-rinsing — stubborn soiling is rinsed before brushing, lifting both cleaning power and wash speed. One investment covers every wash need, with no later add-on upgrades.
Pre-wash, brush, high-pressure and drying in one, at the peak of the whole range in result and efficiency. Compared with pass-through KM-H3: better suited to batch fine washing of sanitation trucks that demand the highest cleanliness (pass-through prioritizes throughput). Compared with touchless KM-H1: more thorough on stubborn leachate and oil (touchless prioritizes paint care and water saving).
Tell us your vehicle types, site and cleaning requirements — KMRON engineers will provide a tailored proposal and quote within 24 hours.